Bard Silastic Two-Way Foley Catheter Features
- This indwelling catheter comes with 30cc Balloon Capacity
- features silicone coating for less friction
- Firm and flexible
- Lubrication: Non-stick silicone coating
What to buy with Bard Silastic 2-Way Specialty Foley Catheter
- Bard Bedside Urine Drainage Bag With Anti-Reflux Device
- Bard Catheter Plug And Cap
- Deluxe Catheter Bag
Inflation and Deflation Instructions for Two-Way Foley Catheter
- Catheter Inflation:
- Ensure that the Bard Foley catheter balloon is positioned well within the patients bladder. Slowly, with a gentle, constant force, inflate the Bard Foley catheter balloon with the volume prescribed on the package
- Note that the 5cc balloon must be inflated with between 9cc to 10cc of sterile water
- Improperly inflated Bard Foley catheter balloons may cause drainage and deflation difficulties
- Using fluid other than sterile water may cause the balloon not to empty properly, especially after long dwell times
- Catheter Deflation:
- Select a luer slip syringe
- Slide the plunger of the syringe up and down the barrel of the syringe several times to loosen it up
- Compress the plunger all the way and then pull back the plunger slightly so that it does not adhere to the front of the syringe barrel
- Gently insert the syringe in the catheter valve
- Do not use more force than is required to make the syringe stick in the valve
- Allow the pressure within the balloon to force the plunger back and fill the syringe with water
- If you notice slow or no deflation, re-seat the syringe gently. Once again, allow the balloon to deflate slowly on its own
- If the balloon does not deflate, reposition the patient.
- Ensure that the catheter is not in traction, the proximal end of the catheter is not compressed within the bladder neck
- Ensure that urine flows freely
- Attempt to deflate the balloon by using the pressure in the balloon to force water into the syringe as described above
- If the balloon stills fails to deflate, apply very gentle slow aspiration. Aspiration that is too rapid, or too forceful, may cause the inflation lumen within the Foley catheter to collapse
- If permitted by hospital protocol, the valve arm may be severed
- If this fails, contact an adequately trained professional for assistance, as directed by hospital protocol
Warnings:
- On catheter, do not use ointments or lubricants having a petrolatum base. They will damage latex and may cause balloon to burst.
- After use, this product may be a potential biohazard. Handle and dispose of in accordance with accepted medical practice and applicable local, state and federal laws and regulations.
- Visually inspect the product for any imperfections or surface deterioration prior to use. Use Luer tip syringe to inflate with stated mL of sterile water OR for pre-filled products, remove clip and squeeze reservoir to inflate with stated mL of sterile water.
- Store catheters at room temperature away from direct exposure to light, preferably in the original box
