Features of Drive Low Height Overbed Table
- Walnut woodgrain melamine top
- Height adjustable and can be raised and lowered to different height levels
- Designed specifically for use with low beds with 3.25″ frame-to-floor clearance
- Swivel casters make it easy to move the table
- Constructed with tubular steel and a durable, attractive chrome finish
Drive Low Overbed Table User Manual
Who should use it?
Drive low bed table is an ideal choice for using as a surface for food trays and holding personal items like magazines, cups, phones, and many more. It is best suited for people with the following conditions:
- Hospital patients
- Seniors with limited mobility
- People who live at home and are confined to their beds
Frequently Bought Together
- Vive Bed Ladder – It helps you to raise from a seated position in bed
- Aluminum Reacher With Magnetic Tip – Gives you access to things that are placed in hard-to-reach places
- Sammons Preston Adjustable Thigh Lifter – It can be used for independent repositioning of the leg to make you sit comfortably in the bed
How to Assemble it?
- Stand Column (5) on the end, making sure the Trip Rod is visible in the rectangular tube but not protruding out of the top, as shown in Fig. 1. If necessary, shake Column (5) until the rod drops.
- Insert Trip Handle (6) into Column (5) with the rounded side up. Be sure the Trip Handle (6) rests on top of the rod inside the Column foot (5). Fig. 1
- Place the Top (10) on a flat surface, with the Top Bracket (8) facing upward. Then while holding the Trip Handle (6) in place so it doesn’t fall out, insert the Column (5) into the Top Bracket (8). Align the holes in the Column foot (5), the Trip Handle (6), and the Top Bracket (8). Install both bolts (9) and both nuts (7) thru these aligned holes with the two (2) 7/16” wrenches. Fig. 2
- Place the base (4) on the floor and install the four casters (3).
- Place two bolts (1) through the holes in the bolt plate (2). Place this assembly into the base (4). Tighten the bolts to the Column (5) with a 9/16” wrench.
- Stand the table on its casters (3).
- Remove the black shipping screw in the column and replace it with the zinc-plated screw (11) using a Phillips screwdriver. Fig. 3
