Features of 2005: Duralife Tilt-In-Space Adult Shower Chair
- Duralife Commode and Shower Chair provides sense of dignity because of seat angle and privacy in toileting
- Tilt-In-Space facilitates relaxation
- Provides clients with a greater sense of independence
- PVC will not chip, dent or peel and it is simple to clean
- Duralife PVC won’t chip, dent or peel and it is simple to clean
- Easy to tilt
- Designed to cradle clients in a reclined position with an open front, padded toilet seat
- Enhances the feeling of security and comfort
- Duralife provides clients with a greater sense of independence
Note: This product cannot be exchanged or returned due to hygiene reasons.
Duralife Shower & Commode Chair Benefits
- Easy to tilt
- Has extra large casters
- Easy to clean
- Tilt-In-Space facilitates relaxation
- Comes with dual swing arms
What to buy with Tilt N Space Shower & Commode Chair (Adult)
- Bath Sponge and Toe Washer
- McKesson Premium Toilet Paper
- Action Products Commode Chair Pad
Duralife Tilt-n-Space Adult Shower Commode Chair Care Instructions
PVC Pipe cleaning instructions
- Use a soft cloth and wash with soap and water or any nonabrasive cleaner. Disinfectants may be used as required. Use alcohol or acetone on any deep scratches or markings.
- Swing arm chairs are not water tight and disinfectant can be used inside the pipe. Let the solution drain out of the bottom of chair before transporting.
Polyester Fabric cleaning instructions
- Prepare a cleaning solution using 1 tablespoon of liquid dish detergent and 2 tablespoons of household bleach mixed with 1 gallon of water. Use a sponge or soft cloth dampened in the solution.
- Remove the solution with a sponge or soft cloth and clean water. Use a brush in a circular motion to reach crevices. Disinfectants may be used as required. Do not tumble dry.
Casters installtion in Tilt-n-Space Commode Chair
To install casters in shower chair and other products:
- Turn product upside down on a protected surface.
- Align caster stem with the hole in the caster socket and tap in with a soft faced hammer. Casters should be lubricated on a routine basis with a silicone lubricant. Hair and any foreign material should be removed from around the axel.
- Drain holes in the bottom of the caster fittings should be checked for blockage. Insert a small wire in the hole to remove any accumulated debris.
Caution – Products are made of plastic pipe. Do not store near a heat source.
