Devilbiss Compressor Nebulizer Features
- Comes ready to use with all the attachments
- Filter
- Tubing
- Disposable Nebulizer
- Metal frame motor construction
- Modern styling, durability and ease of use make the unit perfect for in-home asthma treatments
- Only approved compressor for use with TOBI (tobramycin solution for inhalation)
- Devilbiss Nebulizer is unique 4-pole motor design extends the life of the unit
- Used with adult or pediatric patients
- Large built-in compartment for storing nebulizers and tubing
- Unmatched in quality, value and performance
- A built-in nebulizer holder is a convenient place to store the nebulizer if the treatment is interrupted
- Devilbiss Pulmo-Aide is the longest-lasting compressor in the market with an average product life of 10 years
- Includes free instructional DVD
Why choose Pulmo Aide Nebulizer System?
- Maximum compressor pressure – 30 psig or greater
- Compressor free air flow – 9 lpm or greater
- The longest lasting compressor on the market with an average product life of ten years
- The metal frame motor construction
- Unique four-pole motor design extends life of the unit
- Large built-in compartment for storing nebulizers and tubing
- Built-in nebulizer holder
VixOne Nebulizer Features
- MMAD of 2.7 microns
- 7 feet kink-resistant flex hose tubing
- Respirable Fraction – 84% below 5 microns
- Comfortable mouthpiece design
- Low residual volume (0.7cc)
- High capacity medication bowl (>10cc)
- Nebulizes in the upright position or at angles up to 45degrees to enhance comfort during treatment
- Anti-spill free design provides secure seal
- The reusable model is dishwasher safe to promote frequent cleaning
- Universal connector accommodates standard adult and pediatric masks
- Latex-free
Pulmo Aide Compressor Parts
| 1. Storage compartment | |
| 2. Storage compartment door with operating instructions | |
| 3. Power switch | |
| 4. Filter cap | |
| 5. Air-outlet connector | |
| 6. Carrying handle | |
| 7. Power cord storage | |
| 8. Nebulizer holder |
Pulmo Aide Nebulizer Parts
| 1. Mouthpiece | |
| 2. T-piece | |
| 3. Corrugated tubing | |
| 4. Cap | |
| 5. Baffle | |
| 6. Medication cup | |
| 7. Nebulizer air-inlet connector | |
| 8. Tubing |
What to buy with Pulmo-Aide Compressor Nebulizer?
- Devilbiss Long Life Air Inlet Filter
- Devilbiss VixOne Disposable Nebulizer
- Drive Disposable Nebulizer Kit
Pulmo-Aide Nebulizer Guides
- Devilbiss 5650D Instruction Guide
- Nebulizer Compatibility Guide
How to Operate Devilbiss Nebulizer?
- Place Pulmo-Aide Compressor Nebulizer System on a level, sturdy surface so that the controls can be easily reached when seated. Never block the air openings of the product or place it on a soft surface, such as a patient lap or a bed or couch where the air openings may be blocked.
- Open the door to a storage compartment.
- Make sure the power switch is in the “Off” position. Unwrap power cord and plug the power cord into an appropriate wall outlet.
- Wash hands.
- Connect one end of the nebulizer tubing to the compressor air-outlet connector.
- Assemble clean nebulizer and add prescribed medication.
- Assemble mouthpiece, t-piece, and corrugated tubing (if applicable) and insert into the top of the nebulizer cap. If using an aerosol mask, insert the bottom part of the mask directly into the top of the nebulizer cap.
- Attach tubing to nebulizer air-inlet connector.
- Press the power switch “On” to start the compressor.
- Begin treatment by placing the mouthpiece between teeth. With mouth closed, inhale deeply and slowly through the mouth as aerosol begins to flow, then exhale slowly through the mouthpiece. If treatment needs to be interrupted, simply press the power switch “Off”.
- If an aerosol mask is used, place the mask over the mouth and nose. As aerosol begins to flow, inhale deeply and slowly through the mouth, then exhale slowly.
- When treatment is complete, turn the unit off by pressing the power switch to the “Off” position. Unplug the unit from the wall power outlet.
How to clean Pulmo Aide Nebulizer?
- Clean after every use
- All parts of the nebulizer, except tubing, should be cleaned
- With the power switch in the “Off” position, unplug the power cord from the wall outlet
- Disconnect the tubing from the air-inlet connector and set aside
- Disassemble mouthpiece or mask from the cap
- Open nebulizer by turning cap counterclockwise and removing the baffle
- Wash all items, except tubing, in a warm water/dishwashing detergent solution
- Rinse under warm tap water for 30 seconds to remove detergent residue
- Allow airing dry
How to clean Pulmo Aide Compressor?
- With the power switch in the “Off” position, unplug the power cord from the wall outlet
- Wipe outside of the compressor cabinet with a clean damp cloth every few days to keep dust-free
